Honeywell FMZ Series Pilot'S Manual Download

Page: 63 / 542

Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter

A28--1146--181

REV 3 Mar 2009

System Components

3-22

Honeywell International Inc. Do not copy without express permission of Honeywell.

—

INVALID FPLN OPERATION -- This is an alerting system

message indicating the operation/request is no longer valid. The

FP subsystem issues this message for graphical flight planning

operations when the operation is no longer permitted at the

specified waypoint.

—

INVALID NAV DB -- This is an alerting system message

indicating the navigation database is invalid and not useable.

The required action is to reload the database.

—

INVALID NOTAM LIST -- This is an advisory system message

indicating the NOTAM list is invalid.

—

INVALID PASSWORD -- This is an advisory operator message

indicating the entered password is incorrect.

—

ISA DEV EXCEEDED -- This is an advisory operator message

indicating the entered temperature has caused the International

Standard Atmosphere (ISA) deviation to be exceeded at the

altitude.

—

LABEL CAN NOT BE CHANGED -- This is an advisory message

indicating the label specified in the aircraft database is a required

label for the aircraft and can not be changed.

—

LAST LEG -- This is an alerting system message indicating the

active leg is the last leg of the flight plan and the TO waypoint is

not the destination.

—

LIST FULL -- This is an advisory operator message indicating

another entry into a list is not permitted because the list is full.

—

NAV X FAILED -- This is an alerting system message indicating

the FMS senses a NAV failure and X represents the radio

number.

—

NDB OVER MAX SIZE -- This is an alerting system message

indicating a navigational database has been loaded larger than

the available area for the navigational database.

—

NO APPROACH SELECTED -- This is an advisory operator

message indicating the approach transition page was exited and

no approach transition was selected. Therefore, the approach

has been cleared and is not added to the flight plan.

This message is displayed when exiting the approach transition

page with no approach transition selected and dashes are

displayed as the course.

Summary of Contents for FMZ Series































































































































































































































































































































































































































































































































































Search results

Summary of Contents for FMZ Series

Reviews:

Related manuals for FMZ Series

Brands by name

Popular brands

Honeywell FMZ Series, Pilot'S Manual

Search results

Summary of Contents for FMZ Series

Reviews:

Related manuals for FMZ Series

Brands by name

Popular brands