Honeywell FMZ Series Pilot'S Manual Download

Page: 339 / 542

Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter

A28--1146--181

REV 3 Mar 2009

6-181

Navigation

Honeywell International Inc. Do not copy without express permission of Honeywell.

True/Magnetic Selection

The FMS 1 MAINTENANCE 3/3 page, shown in Figure 6--135, is

dedicated to selecting true or magnetic headings for the FMS and the

HSI (horizontal situation indicator) heading display. When TRUE is the

active mode, all courses and headings displayed by the FMS are

followed by the letter

. When MAG is the active mode, all courses and

headings displayed by the FMS are followed by a degree symbol (

) on

the FMS pages.

00797.05

Figure 6--135

FMS 1 MAINTENANCE 3/3

The active mode also reflects how courses are displayed on the HSI.

When the FMS is selected as the navigation source for the HSI, the

course displayed by the FMS is relative to the mode displayed for the

ACTIVE HDG MODE on this page.

The pilot toggles between magnetic and true by pushing the line select

key at 2R.

The RETURN TO SERVICE page is directly accessed by pushing the

line select key at 6L.

Summary of Contents for FMZ Series































































































































































































































































































































































































































































































































































Search results

Summary of Contents for FMZ Series

Reviews:

Related manuals for FMZ Series

Brands by name

Popular brands

Honeywell FMZ Series, Pilot'S Manual

Search results

Summary of Contents for FMZ Series

Reviews:

Related manuals for FMZ Series

Brands by name

Popular brands