Honeywell FMZ Series Pilot'S Manual Download

Page: 45 / 542

Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter

A28--1146--181

REV 3 Mar 2009

System Components

3-4

Honeywell International Inc. Do not copy without express permission of Honeywell.

Alphanumeric Keys

The MCDU alphanumeric keyboard is used by the pilot for input to the

FMS. The alphanumeric keys make entries to the scratchpad only.

The following are each represented with a key on the MCDU:

Letters of the alphabet

The numbers 0--9

The decimal

The plus/minus

The space

The slash.

See Figure 3--1 for key location. The

(space) key is used to insert

a space following a character in the scratchpad. The

+/--

(plus/minus)

key is used to enter a -- or + in the scratchpad. Pushing the

+/--

key

initially results in a -- being entered. A subsequent pushing changes the

-- to a +. Continued pushing of

+/--

key toggles the +/-- display.

Scratchpad

The bottom line on the MCDU is the scratchpad. The scratchpad is a

working area where the pilot enters data and/or verifies data before line

selecting the data into its proper position. Alphanumeric entries are

made to the scratchpad using the keyboard. As each key is pushed, the

character is displayed in the scratchpad. Information in the scratchpad

does not affect the FMS until the information is moved to another line

on the display. Data is retained in the scratchpad throughout all mode

and page changes. Follow Procedure 3--1 to edit any scratchpad entry

of the MCDU.

Summary of Contents for FMZ Series































































































































































































































































































































































































































































































































































Search results

Summary of Contents for FMZ Series

Reviews:

Related manuals for FMZ Series

Brands by name

Popular brands

Honeywell FMZ Series, Pilot'S Manual

Search results

Summary of Contents for FMZ Series

Reviews:

Related manuals for FMZ Series

Brands by name

Popular brands