Honeywell FMZ Series Pilot'S Manual Download Page 36

Page: 36 / 542

Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter

A28--1146--181

REV 3 Mar 2009

1-3

Introduction

Honeywell International Inc. Do not copy without express permission of Honeywell.

CUSTOMER SUPPORT

Global Customer Care (GCC)

For all aerospace inquiries including:

Technical assistance

Aircraft on ground (AOG)

Sales: new and exchange

Repair and overhaul

Supply chain optimization

Rentals

Return material authorization (RMA).

Use the following Global Customer Care contact numbers:

Fax:

1--602--822--7272

Phone: 1--800--601--3099 (U.S.A./Canada)

Phone: 1--602--365--3099 (International).

Also, the Global Customer Care is available if you need to:

Identify a change of address, telephone number, or e--mail address

Honeywell Aerospace Technical Publications

If you have access to the Internet, go to the Honeywell Online Technical

Publications web site at

http://portal.honeywell.com/wps/portal/aero to:

Download or see publications online

Make an order for a publication

Tell Honeywell of a possible data error (report a discrepancy) in a

publication.

If you do not have access to the Honeywell Online Technical

Publications web site and need technical publications information:

Send an e--mail message to the Global Customer Care at:

[email protected]

Send a fax or speak to a person at the Global Customer Care

contact numbers.

Summary of Contents for FMZ Series































































































































































































































































































































































































































































































































































Search results

Summary of Contents for FMZ Series

Reviews:

Related manuals for FMZ Series

Brands by name

Popular brands

Honeywell FMZ Series, Pilot'S Manual

Search results

Summary of Contents for FMZ Series

Reviews:

Related manuals for FMZ Series

Brands by name

Popular brands