Honeywell FMZ Series Pilot'S Manual Download Page 375

Page: 375 / 542

Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter

A28--1146--181

REV 3 Mar 2009

7-9

Flight Plan

Honeywell International Inc. Do not copy without express permission of Honeywell.

Descent Constraints

-- Descent constraints are altitude, speed,

and angle constraints associated with waypoints in the descent

portion of the flight plan. Altitude constraints are AT, AT or ABOVE,

or AT or BELOW. For example, entering 10000A (

following the

altitude) indicates AT or ABOVE. Entering 10000B (

following the

altitude) indicates AT or BELOW. Entering 10000 (no letter)

indicates AT. The FMS obeys descent speed constraints at and after

the waypoint containing the constraint. The FMS obeys angle

constraints from the TOD to the waypoint containing the constraint.

Normally, the FMS calculates the angle constraint based on

performance initialization. However, a specific angle constraint is

permitted to be entered at a waypoint in the flight plan.

Summary of Contents for FMZ Series































































































































































































































































































































































































































































































































































Search results

Summary of Contents for FMZ Series

Reviews:

Related manuals for FMZ Series

Brands by name

Popular brands

Honeywell FMZ Series, Pilot'S Manual

Search results

Summary of Contents for FMZ Series

Reviews:

Related manuals for FMZ Series

Brands by name

Popular brands