Honeywell FMZ Series Pilot'S Manual Download

Page: 38 / 542

Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter

A28--1146--181

REV 3 Mar 2009

2-1

System Description

Honeywell International Inc. Do not copy without express permission of Honeywell.

2. System Description

INTRODUCTION

The flight management system (FMS) has two primary functions and

multiple secondary functions. The primary functions are position

computation and flight planning. These functions work with the

associated guidance in the lateral axis. The navigation database (NDB)

contained in the FMS is essential to these functions. The database is

used to store waypoints, navaids, airways, procedures, airports, and

other navigation data.

The FMS connects to a variety of short range and long range navigation

sensors. The primary short range sensors are very high frequency

omnirange/distance measuring equipment (VOR/DME) and( DME/DME).

Long--range sensors include attitude and heading reference system

(AHRS) and global positioning system (GPS). Using the available

sensors, the FMS develops a position based on a blend or mix of sensor

inputs. Based on the position and the flight plan, the FMS generates

information to be displayed on the multifunction control display unit

(MCDU) and electronic display system (EDS).

The lateral navigation function of the FMS calculates navigation

information relative to selected geographical points. The pilot can

define flight plan routes worldwide. The system outputs advisory

information and steering signals that show the pilot or PRIMUS EPIC

how to guide the aircraft along the desired route. Routes are defined

from the present position of the aircraft to a destination waypoint along

a great circle route or through a series of great circle legs defined by

intermediate waypoints.

The FMS is resident in one of the the processor modules in the modular

avionics unit (MAU), as shown in Figure 2--1. A primary purpose of the

FMS is to manage navigation sensors to produce a composite position.

Using the composite position, along with flight planning capabilities, the

FMS controls lateral navigation, performance, and guidance work

throughout the flight. The FMS interfaces primarily with the following

components:

Multifunction control display unit (MCDU)

Modular avionics unit (MAU).

Summary of Contents for FMZ Series































































































































































































































































































































































































































































































































































Search results

Summary of Contents for FMZ Series

Reviews:

Related manuals for FMZ Series

Brands by name

Popular brands

Honeywell FMZ Series, Pilot'S Manual

Search results

Summary of Contents for FMZ Series

Reviews:

Related manuals for FMZ Series

Brands by name

Popular brands