Honeywell FMZ Series Pilot'S Manual Download

Page: 427 / 542

Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter

A28--1146--181

REV 3 Mar 2009

8-5

Progress

Honeywell International Inc. Do not copy without express permission of Honeywell.

VNAV DATA

The VNAV DATA page, shown in Figure 8--4, is accessed by pushing

the VNAV DATA prompt on the PROGRESS 2/3 page.

Figure 8--4

VNAV DATA 1/1

The following line select keys correspond to the associated definitions

on the VNAV page.

-- Shows VNAV figure of merit.

-- Shows deviation from path.

-- Shows distance and time to top--of--climb.

-- Shows top--of--climb altitude.

-- The distance and time to TOD and/or bottom--of--descent

(BOD) is displayed at 3L. When the next descent path type is

smoothing or the aircraft is past the TOD, then BOD is displayed

above the TOD. Otherwise, the TOD is displayed above the BOD.

When the next descent path type is smoothing, then SMOOTHING

is displayed in large cyan font right justified to column 17 of the TOD

data. When the aircraft flies past the TOD without descending,

PAST is displayed in large green font right justified to column 17 of

the TOD data.

-- Shows TOD and/or BOD altitude.

-- Gives access to PERFORMANCE INIT page 1.

-- Gives access to PROGRESS page 2.

Summary of Contents for FMZ Series































































































































































































































































































































































































































































































































































Search results

Summary of Contents for FMZ Series

Reviews:

Related manuals for FMZ Series

Brands by name

Popular brands

Honeywell FMZ Series, Pilot'S Manual

Search results

Summary of Contents for FMZ Series

Reviews:

Related manuals for FMZ Series

Brands by name

Popular brands