Honeywell FMZ Series Pilot'S Manual Download

Page: 469 / 542

Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter

A28--1146--181

REV 3 Mar 2009

10-17

Multifunction Control Display Unit (MCDU) Entry Format

Honeywell International Inc. Do not copy without express permission of Honeywell.

Table 10--1 (cont)

MCDU Entry Format

Entry

Format

VIA.TO

The VIA.TO prompt is used in flight

planning. A variety of entries are

possible with the prompt. The same

entries are permitted to be made to

the flight plan without the prompt (such

as when adding waypoints). The

following is a list of possible entries:

Airway.Waypoint

Flight Plan Name.Waypoint

Flight Plan Name

Waypoint

Temporary Waypoint.

VOR Identifier

The minimum entry is one character

The maximum entry is three

characters.

Waypoint Name

The name is permitted to be from one

to five alphanumeric characters

First character cannot be a dash (--).

Weight (any weight

entry)

Entry is pounds or kilograms

depending on configuration

Entry is one to six digits

Range is from 0 to 999,999.

Wind (any wind

entry)

Entry is made in the form of

direction/speed

The minimum entry for direction is one

digit

The minimum entry for speed is one

digit

The range of direction is 0 to 360

degrees

The range of speed is 0 to 250 kts.

Summary of Contents for FMZ Series































































































































































































































































































































































































































































































































































Search results

Summary of Contents for FMZ Series

Reviews:

Related manuals for FMZ Series

Brands by name

Popular brands

Honeywell FMZ Series, Pilot'S Manual

Search results

Summary of Contents for FMZ Series

Reviews:

Related manuals for FMZ Series

Brands by name

Popular brands