Honeywell FMZ Series Pilot'S Manual Download

Page: 236 / 542

Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter

A28--1146--181

REV 3 Mar 2009

Navigation

6-78

Honeywell International Inc. Do not copy without express permission of Honeywell.

The predictive RAIM page is accessed by selecting the PRED RAIM

prompt from any GPS STATUS page. When selected, the

PREDICTIVE RAIM page, shown in Figure 6--63, is displayed.

00720.03

Figure 6--63

PREDICTIVE RAIM 1/1

The PREDICTIVE RAIM page includes the following information:

Predictive RAIM source (1L)

Destination RAIM selection (DEST) prompt (1L)

Destination identifier (2L)

Estimated time of arrival (ETA) at destination (2L)

Predicted RAIM solution for destination (3L)

Pilot selection (PILOT SEL) prompt (1R)

Pilot selected identifier (2R)

Pilot entered time (3R)

Predicted RAIM solution for pilot defined place (3R)

Access to the position sensors (POS SENSORS) prompt (6L)

Return access to the GPS status page (RETURN) (6R).

Summary of Contents for FMZ Series































































































































































































































































































































































































































































































































































Search results

Summary of Contents for FMZ Series

Reviews:

Related manuals for FMZ Series

Brands by name

Popular brands

Honeywell FMZ Series, Pilot'S Manual

Search results

Summary of Contents for FMZ Series

Reviews:

Related manuals for FMZ Series

Brands by name

Popular brands