Honeywell FMZ Series Pilot'S Manual Download

Page: 52 / 542

Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter

A28--1146--181

REV 3 Mar 2009

3-11

System Components

Honeywell International Inc. Do not copy without express permission of Honeywell.

Accessing any FMS Function

The FMS prompts the pilot at 6L and 6R for the most likely functions to

be selected. Using these prompts, the FMS steps the pilot through

procedures such as initialization. Operating out of sequence or

accessing other areas of the FMS at any time is possible. Follow

Procedure 3--2 to access any function of the FMS.

Step Procedure 3--2 Accessing any FMS Function

Determine the required function. All functions are available

at all times from the

PERF

NAV

FPL

PROG

RADIO,

MENU

, or

DIR

keys.

Select the appropriate

PERF

NAV

FPL

PROG

DIR

key.

When

PERF

NAV

, is selected, read the menu list for the

required function or feature.

Select the correct function or feature.

The function or feature selected is displayed by the FMS.

Continue working using the prompts at 6L and 6R when

part of a sequence, such as initialization, is being

completed.

Annunciators

Annunciators are displayed on the electronic display system (EDS) or

other remote annunciators. white indicates an advisory annunciator

and amber indicates an alerting annunciator.

Dead Reckoning (DR)

-- DR is an alerting annunciator. This

annunciator is displayed or lit when operating in the DR mode for

longer than 2 minutes. The DR mode is defined as the loss of radio

updating and all other position sensors AHRS (attitude and heading

reference system) and GPS (global positioning system).

Summary of Contents for FMZ Series































































































































































































































































































































































































































































































































































Search results

Summary of Contents for FMZ Series

Reviews:

Related manuals for FMZ Series

Brands by name

Popular brands

Honeywell FMZ Series, Pilot'S Manual

Search results

Summary of Contents for FMZ Series

Reviews:

Related manuals for FMZ Series

Brands by name

Popular brands