Honeywell FMZ Series Pilot'S Manual Download

Page: 191 / 542

Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter

A28--1146--181

REV 3 Mar 2009

6-33

Navigation

Honeywell International Inc. Do not copy without express permission of Honeywell.

Undefined Waypoints

When an identifier is entered on the DATA BASE WPT page and the

FMS cannot find a waypoint in the navigation database with that

identifier, the FMS goes to the PILOT WAYPOINT page for waypoint

definition.

FMS DATABASE

The FMS database consists of two parts: a navigation database and a

custom (or pilot--defined) database. The navigation database is loaded

into the FMS and can not be changed by the pilot. Using the custom

database, the pilot customizes the FMS by defining waypoints and

storing flight plans.

Navigation Database

The FMS retrieves information from the navigation database about

waypoints and procedures used in flight planning and to tune navaids

for position determination. The database, supplied by Honeywell, is

updated every 28 days.

The navigation database is designated with a version number, region

name, and cycle number (e.g., Version 3.01, WORLD3--310). The FMS

uses a Version 3.01 navigation database or other approved version

number. The region name (e.g., WORLD 3, NZ3EAST, NZ3WEST)

varies depending on the content of the navigation database. The last

2 digits indicate the cycle number (e.g., --310). There are 13 cycles

(28 day periods) during the year. Therefore, the last two digits ranges

from 01 to 13. When a cycle has to be modified off cycle, a letter is

appended starting with A. For example, WORLD3--310A indicates a

modified 10th cycle of the navigation database.

The navigation database contains the following:

Navaids

Airports

Heliports

Runways

Helipads

Airways (high and low)

SIDs and STARs

Approaches

Named intersections

Outer markers.

Summary of Contents for FMZ Series































































































































































































































































































































































































































































































































































Search results

Summary of Contents for FMZ Series

Reviews:

Related manuals for FMZ Series

Brands by name

Popular brands

Honeywell FMZ Series, Pilot'S Manual

Search results

Summary of Contents for FMZ Series

Reviews:

Related manuals for FMZ Series

Brands by name

Popular brands