Honeywell FMZ Series Pilot'S Manual Download Page 243

Page: 243 / 542

Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter

A28--1146--181

REV 3 Mar 2009

6-85

Navigation

Honeywell International Inc. Do not copy without express permission of Honeywell.

NOTICE TO AIRMEN

The pilot prevents the FMS from using a particular VOR and/or DME

station for position computations by using the NOTAM page. Stations

are entered as temporary or permanent. Entries in the temporary

column (up to 3) are deleted after the FMS is powered down (on

completion of the flight). Entries in the permanent column (up to 3) are

stored in FMS memory until removed by pilot action.

Procedure 6--10 explains how to enter and delete entries from the

NOTAM page.

Step Procedure 6--10 NOTAM Entries

Select POS SENSORS from NAV INDEX page 1. Select

VOR/DME (6L) and then NOTAM (6R).

Enter the navaid identifier into the scratchpad. Push a line

select key under either the permanent or temporary

column, as shown in Figure 6--69.

00733.04

Figure 6--69

PERMANENT/TEMPORARY

Delete an entry by pushing the

DEL

key. *DELETE* is

displayed in the scratchpad. Then push the line select key

adjacent to the navaid identifier. An entry is permitted to be

replaced with another navaid without first being deleted.

Summary of Contents for FMZ Series































































































































































































































































































































































































































































































































































Search results

Summary of Contents for FMZ Series

Reviews:

Related manuals for FMZ Series

Brands by name

Popular brands

Honeywell FMZ Series, Pilot'S Manual

Search results

Summary of Contents for FMZ Series

Reviews:

Related manuals for FMZ Series

Brands by name

Popular brands