Honeywell FMZ Series Pilot'S Manual Download

Page: 462 / 542

Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter

A28--1146--181

REV 3 Mar 2009

Multifunction Control Display Unit (MCDU) Entry Format

10-10

Honeywell International Inc. Do not copy without express permission of Honeywell.

Table 10--1 (cont)

MCDU Entry Format

Entry

Format

Nondirectional

Beacons

All nondirectional beacons in the NAV

database are accessed by appending

the NB suffix to the beacon identifier

The minimum entry is three characters

The maximum entry is five characters.

NOTE:

When the NDB also has a waypoint

identifier, the NDB waypoint identifier is

in the NAV database only under the

waypoint name.

Obstacle Distance

Entry is one to six digits

Range is from 0 to 1220.

Obstacle Elevation

Entry is one to five digits

Range is from --2000 to 16,500.

Oceanic Waypoints

These waypoints are named according

to ARINC 424 navigation database

specification

Southern hemisphere uses the letters

Northern hemisphere uses the letters

Latitude always proceeds longitude

Only the last two digits of longitude are

used

Placement of the letter designator (N,

S, E, W) in the string of five characters

indicates the value of the longitude

one--hundredths digit

The letter in the last position

indicates longitude is less than 100

The letter in the third position

indicates longitude is 100 or greater.

Summary of Contents for FMZ Series































































































































































































































































































































































































































































































































































Search results

Summary of Contents for FMZ Series

Reviews:

Related manuals for FMZ Series

Brands by name

Popular brands

Honeywell FMZ Series, Pilot'S Manual

Search results

Summary of Contents for FMZ Series

Reviews:

Related manuals for FMZ Series

Brands by name

Popular brands