Honeywell FMZ Series Pilot'S Manual Download

Page: 346 / 542

Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter

A28--1146--181

REV 3 Mar 2009

Navigation

6-188

Honeywell International Inc. Do not copy without express permission of Honeywell.

Step Procedure 6--34 Flight Configuration Setup

Set origin/destination display (ORG/DEST DISPLAY) to

ON or OFF at 3R. The default for this setting is OFF. This

option applies to how flight origins and destinations are

displayed on EFIS.

NOTE:

Do NOT set ORG/DEST DISPLAY to ON unless the installed

EFIS has been modified to support this feature. When

attempted, the origin and destination waypoint

symbols/identifiers are not displayed on EFIS.

DETAILS

ORG/DEST DISPLAY ON -- The FMS lists the closest

airports for display on EFIS. When the option is selected

ON, the origin and destination airports are included in

the list even when not among the closest airports. The

origin and destination airports are also displayed as

runway symbols on modified EFIS with the ORG/DEST

DISPLAY ON option.

ORG/DEST DISPLAY OFF -- When the selection is

OFF, the origin and destination airports are included only

when among the closest airports. The origin and

destination airports are displayed as normal waypoint

symbols.

Set SPECIAL MISSIONS to ON or OFF at 4R. The FMS

contains special mission patterns. This selection makes

those additional patterns available. The default setting is

OFF.

DETAILS

SPECIAL MISSIONS ON -- All patterns in the FMS

(HOLD, PROCEDURE TURN, FLYOVER, ORBIT,

RADIAL) are available for use.

SPECIAL MISSIONS OFF -- Only standard patterns

(HOLDING, PROCEDURE TURN, FLYOVER) are

available for use.

Push

NEX

T to select page 2.

Summary of Contents for FMZ Series































































































































































































































































































































































































































































































































































Search results

Summary of Contents for FMZ Series

Reviews:

Related manuals for FMZ Series

Brands by name

Popular brands

Honeywell FMZ Series, Pilot'S Manual

Search results

Summary of Contents for FMZ Series

Reviews:

Related manuals for FMZ Series

Brands by name

Popular brands