Honeywell FMZ Series Pilot'S Manual Download Page 260

Page: 260 / 542

Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter

A28--1146--181

REV 3 Mar 2009

Navigation

6-102

Honeywell International Inc. Do not copy without express permission of Honeywell.

The CONVERSION 4/4 page, shown in Figure 6--81, shows the

QFE--QNH conversion page. The CONVERSION 4/4 page is designed

to support QFE/QNH conversions and give conversions between

barometric altimeter units.

01636.01

Figure 6--81

CONVERSION 4/4

QNH altimeter settings result in the altimeter displaying the aircraft

altitude above mean sea level based on the local station pressure.

When an altimeter is set to QFE, the aircraft altitude above a station

is displayed. With the altimeter set to QFE and the aircraft on the

ground, zero (0) is displayed on the altimeter. Inflight QFE gives height

above ground level (without consideration for nonstandard

temperature).

When an elevation exists at 1R, entry of a QNH or QFE (in any unit)

results in the remaining parameters being displayed. Figure 6--82 is an

example with a QNH entry of 29.92. When an elevation does not exist,

the FMS is unable to convert to the QFE/QNH altimeter setting. When

the FMS is unable to covert to the QFE/QNH altimeter seetting, the

equivalent unit(s) for the entered altimeter setting are computed and

displayed.

Summary of Contents for FMZ Series































































































































































































































































































































































































































































































































































Search results

Summary of Contents for FMZ Series

Reviews:

Related manuals for FMZ Series

Brands by name

Popular brands

Honeywell FMZ Series, Pilot'S Manual

Search results

Summary of Contents for FMZ Series

Reviews:

Related manuals for FMZ Series

Brands by name

Popular brands