Honeywell FMZ Series Pilot'S Manual Download

Page: 86 / 542

Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter

A28--1146--181

REV 3 Mar 2009

4-17

Operational Example

Honeywell International Inc. Do not copy without express permission of Honeywell.

PERFORMANCE INIT 2/3

-- The PERFORMANCE INIT 2/3 page is

displayed in Figure 4--18. The current speed schedules are

displayed in the PERFORMANCE INIT 2/3 page. Changing any

mode is done by entering the calibrated airspeed (CAS) data

directly. Default values are restored by using the *DELETE* function

on the appropriate line.

Figure 4--18

PERFORMANCE INIT 2/3

The descent angle entered on the PERFORMANCE INIT 2/3 page

is used as the default value for each path. In addition, the descent

angle is used for computing top--of--descent (TOD) points.

The FMS uses the climb, cruise, and descent speed schedules for

advisory target speed display.

The approach/go--around speed prompt (6L), as shown in

Figure 4--18, is used to access approach and go--around speed

schedules.

Summary of Contents for FMZ Series































































































































































































































































































































































































































































































































































Search results

Summary of Contents for FMZ Series

Reviews:

Related manuals for FMZ Series

Brands by name

Popular brands

Honeywell FMZ Series, Pilot'S Manual

Search results

Summary of Contents for FMZ Series

Reviews:

Related manuals for FMZ Series

Brands by name

Popular brands