Honeywell FMZ Series Pilot'S Manual Download Page 492

Page: 492 / 542

Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter

A28--1146--181

REV 3 Mar 2009

Maintenance

12-6

Honeywell International Inc. Do not copy without express permission of Honeywell.

Table 12--1 (cont)

Data Loader Fault Codes

Code

Description

Error Title

ASYNC CMD BAD

RESPONSE

Unused

90--

ASYNC PACKET

CHECK ERRORS

Data errors are being received from

the data loader and the retransmit

count has been exceeded. This is

due to excessive line noise.

FLASH SETUP

ERROR

The FMS flash memory devices are

defective, or have exceeded the rated

erase/write cycles.

FLASH CHARGE

ERASE ERROR

The FMS flash memory devices are

defective, or have exceeded the rated

erase/write cycles.

FLASH WRITE

ERROR

The FMS flash memory devices are

defective, or have exceeded the rated

erase/write cycles.

These codes are associated with the navigation database disks. Contact

local Honeywell support for assistance.

{

These codes are associated with errors in flight plan format requirements.

Contact flight plan for assistance.

Summary of Contents for FMZ Series































































































































































































































































































































































































































































































































































Search results

Summary of Contents for FMZ Series

Reviews:

Related manuals for FMZ Series

Brands by name

Popular brands

Honeywell FMZ Series, Pilot'S Manual

Search results

Summary of Contents for FMZ Series

Reviews:

Related manuals for FMZ Series

Brands by name

Popular brands