background image

Quick Start Guide

5

Thank you for purchasing your 

Tramigo tracking device!

  

This guide will help you set up your T23 Fleet quickly and easily. If you 

have any questions contact your dealer or send an email to 

[email protected]

. On Skype search for 

tramigosupport

 to find 

online support staff. Check 

www.tramigo.com

 for support updates and 

new Tramigo accessories.

Installation Steps

1 -------------- 2 -------------- 3 -------------- 4

Plan                 Setup              Connect              Track

Quick Start Guide

Trouble Shooting

Problem 1: T23 Fleet is not responding.

Possible Causes: No power or unit is sleeping
Possible Solution: Check that the unit has power. The power light should be blinking every 5 seconds. Check that the battery is 
installed correctly. If the battery is low then connect the unit to a power source. If the unit is sleeping it will wake and respond to your 
SMS. Call the unit to see if you hear a ring tone see problem 3 if not see problem 2

.

  Problem 2: Unit is not responding and the GSM light is red.

Possible Causes:  T23 Fleet is unable to acquire a GSM signal at current location, SIM not properly inserted; no SIM installed on 
the unit, SIM has PIN code set.  
Possible Solution:  Move the unit where there is a strong signal, Remove SIM and reinsert SIM to the unit, install a SIM to the unit, 
remove the SIM PIN code.

Problem 3: Unit is not responding and the GSM light is flashing.

Possible causes:  SIM is out of credits if pre-paid account, or there is a temporary network problem, or the phone number of the 
user is incorrect.

Possible Solution:  Check and make sure SIM has sufficient credits, wait for the network to recover, check the phone number of 

the users.

Problem 4: Unit reports old position or No GPS lock and GPS light is blue.

Possible causes:  T23 Fleet is upside down, has no clear view of the sky, nearby tress, houses or buildings obstructing satellite 
signal, metallic tinting of the windshield.
Possible Solution:  Move to a place where the T23 Fleet (light indicators facing up) has a clear view of the sky, ensure that
tinting is non-metallic.  To test the tint, move the unit outside the vehicle and see if GPS light goes off within a minute.

Problem 5: Unit reports unknown location.

Possible causes: The T23 Fleet Location Directory has not been loaded.
Possible Solution:  Contact your dealer or Tramigo support to obtain the Location Directory for your region.

T23 Fleet Indicators

Power – (Green) flashes every 5 seconds when ON, (Steady Green) when charging, (Orange) flashes every 5 seconds when battery 

is too low, (Yellow) when charging and battery is still low, (OFF) when sleeping or when power is shut off

GSM – (OFF) means OK, (Steady RED) when no signal, (RED) flashes when there is a problem sending a SMS.

GPS – (OFF) means OK, (Blue) when no location can be determined.

T23 Fleet Sleep Mode

T23 Fleet has automated power management with 4 sleep modes to extend the battery life for portable users and prevent drain-
ing your car battery for installed users.  When sleeping all the lights are turned off to save power.
Your T23 Fleet will sleep 1 hour after a trip or after 15 minutes of inactivity.  T23 Fleet wakes up when a trip starts, or motion is 
detected.

1st Sleep Mode – Shuts off GPS, wakes each hour for 10 min for 6 hours
2nd Sleep Mode –  Also shuts off GSM so you have to wait for the unit to wake up to answer your SMS. Lasts for 5 days
3rd Sleep Mode – Wakes up every day for 10 minutes. Lasts until the battery power is very low.
4th Sleep Mode – Will only wake up when connected to power.

If you still have problems contact your dealer or email 

[email protected]

 for assistance.

Quick Start Guide

6

SPEED,x

Reports if car travels above x km/h. Range is 10-300.  

Reports again after car has slowed 10km under 

limit.

SPEED,OFF

 turns off reporting

S,100 / S,OFF

Tramigo: Speed limit detected, moving, 0.22 km NE 

of Bangkok City Hall, Phranakhon, Bangkok, TH, 

SW with speed 115 km/h, 08:30 Nov 2

NAME,name

 – Sets  the name of your car (up to 15 

characters). User must have OWNER authority

NAME, Calvin’s Car

ADDUSER,phone number,level

 – Adds replaces an 

entry in the user list.  Level can be OWNER, FRIEND, 

or GUEST

Owner can issue all commands, Guest only FIND

LISTUSER

 Lists the last 4 digits of each user

LISTUSER,ALL

 Lists the complete details of all users

DELUSER,X

 Deletes a specific user

User must have OWNER authority.

AU,+5555555,OWNER

Adds the number with OWNER authority

LU

Tramigo: ListUser, 1-4556 2-5555, 22:58 Nov 21

LU,ALL

Tramigo: ListUser, #1 +5555555 Owner - reports: 

Power - Trip, 22:58 Nov 21

DU,2

   Deletes user number 2

ADDPLACE,place

 –  Adds your own location to the 

Tramigo location directory.  Tramigo will use the 

coordinates of the location your vehicle is currently at.  

Best to park your stop your vehicle first.

DELPLACE,place

Removes a location you have added or an pre-loaded 

location. Place name must be an exact match.

AP,Office 

Name can be up to 40 digits. Upper and lower case. 

Letters and numbers only.

Now try a F command:

Tramigo: parked, at Office, 20:38 Nov 5

DP,Office

STATUS

 – Reports the status of the unit and which 

reports are turned on for you.

ST,X,Y,Z 

 

will send a STATUS report every 

X

 minutes 

or 

Y

 kilometer (on trip mode) and when parked will 

send STATUS report every 

Z

 minutes.

ST

Tramigo: Status, GPS: 60%, GSM: 80%, battery: 

100%, reports: Trip (15), Speed (100), 

Zone (2.0, 14 33’31”N, 120 59’30”), 19:12 Nov 7

SETTINGS

 – Reports the  status of all reporting for 

the unit and the number of user locations you have 

added.  For each report the user number is shown.

SETTINGS

Tramigo: Settings, Alarm:-, Find:-, Ignition:-, 

Power:1, Trip:1/3/4, Speed:-, Zone:1/2, user loca-

tions:2, Metric:on, 14:51 Nov 7

SAFETY AND SECURITY REPORTING

SETUP AND MAINTENANCE

SMS Command

Example Command/Report

 (Short form use)

PASSWORD,oldPassword,newPassword

 –  Changes 

the password for your T23 Fleet. The password can 

be 20 characters in length.  Letters and numbers 

only and is not case sensitive.

PASSWORD,0000,GAVIN123

Tramigo: Password, changed to GAVIN123, 11:33 

Jan 22

F

irmware

 

ver

. 1.07

Personal Assistance

 – Pressing the panic button 

(triangle icon) for more than 2 seconds will send SOS 

report to all users.  

LISTEN,phoneNumber

 

– Your  T23 Fleet will call you 

up and allow you to listen to the area around the unit. 

Requires optional T23 Fleet microphone accessory.  

The phone number is optional and the T23 Fleet will

call this number instead of your mobile phone.

Tramigo: alarm detected, panic button activated, 

parked, at Tramigo Office, Bel Air,  Makati City, 

PH, 14.55895, 121.01931, 03:05 Oct 30

123456789

Phone Calls

 –  Pressing the phone button for more than 2 seconds will call the 1st user in the speed dial list.  

Pressing a second time will call the 2nd user up to 3 users.  Use SD,1,phoneNumber to add a number to slot 

1. SD command will list the users you have set. To answer incoming calls press the phone button.  A hands 

free kit is needed to use this feature.

Reviews: