HDG M299, Operation Manual

Page: 62 / 176

4 Planning and installation – Installing the heating system
62
I
NSTALLING THE ASSEMBLY
PLATES
42.Mount the assembly plates (2) in each of their intended positions
in the two middle suspension rails (1) on each side.
Figure 4/25 - Installing the assembly plates
1
2
3*
2*
1*
Individual steps for installing the assembly plates (2):
– Push the assembly plate through the recess from below (1*).
– Turn the assembly plate 90° anticlockwise (2*).
– Lift the assembly plate and push it to the left (3*).
– Allow the assembly plate to latch in position.