HDG M299, Operation Manual

Page: 48 / 176

4 Planning and installation – Installing the heating system
48
I
NSTALLING THE CENTRAL ASH REMOVAL SYSTEM
1. Slide the transfer station (4) with the ash removal augers into the
two ash removal pipes (5).
2. Install the transfer station (4) on the combustion unit (6) using the
M12 hexagon socket screws (10 mm spanner).
3. Mount the auger trough (1) of the ascending auger on the flange
of the transfer station (4) with the M8 screws (13 mm spanner).
4. Insert the downpipe (2) in the opening of the lid of the ash bin (3).
✓
The central ash removal system is now installed.
I
NSTALLING THE FEEDING SYSTEM
HDG TBZ 200
Figure 4/11 - Installing the central ash removal system
1
4 5
3
2
6
Figure 4/12 - Installing the feeding system TBZ 200
5 2 4 3
1