5 Commissioning the system – Procedure
74
HDG M299/300/350/400 - Version 1 - en
©
HDG Bavaria GmbH 07/2008
S
TOKER
AUGER
,
ROTARY
FEEDER
AND
MATERIAL
CONVEYING
AUGER
In this submenu, the stoker auger, rotary feeder and material
conveying auger can be activated manually in connection with the
HDG feeding system TBZ 200.
✎
See chapter “6 Using the heating system”, section “6.9 MANUAL
menu”, paragraph “Feed system, rotary wheel and material
conveying auger”.
F
EED
SYSTEM
,
AUGER
TROUGH
2
AND
DOSAGE
In this submenu, the feed system, auger trough 2 and dosage can be
activated manually in connection with the HDG feeding system TBZ
150.
✎
See chapter “6 Using the heating system”, section “6.9 MANUAL
menu”, paragraph “Feed system, auger trough 2 and dosage”.
M
ATERIAL
CONVEYING
AUGER
AND
AGITATOR
In this submenu the material conveying auger and agitator can be
activated manually in connection with a distributing container.
See chapter “6 Using the heating system”, section “6.9 MANUAL
menu”, paragraph “Material conveying auger and agitator”.
M
OVING
FLOOR
-
TRANSVERSE
AUGER
In this submenu the transverse auger can be activated manually in
connection with the HDG walking floor feeding system TAK.
✎
See chapter “6 Using the heating system”, section “6.9 MANUAL
menu”, paragraph “Moving floor - transverse auger”.
M
OVING
FLOOR
-
HYDRAULIC
SYSTEM
In this submenu the drive of the walking floor can be activated
manually in connection with the HDG walking floor feeding system.
✎
See chapter “6 Using the heating system”, section “6.9 MANUAL
menu”, paragraph “Moving floor - hydraulic system”.
Once the functionality of all the actuators is checked in manual
operation, the HDG M299/300/350/400 heating system can be
operated in accordance with the set control mode.
F
ILLING
THE
TRANSFER
STATION
OF
THE
CENTRAL
ASH
REMOVAL
SYSTEM
Caution!
Backfiring or smoke can cause injuries or material damage
If the transfer station is not at least half-filled when commissioning
or re-starting after a cleaning, there is a danger of backfiring or
smoke from the boiler. This can cause damage to the heating
system or injury to persons.
Make sure that the transfer station is at least half-filled with ash,
sand, etc.
Summary of Contents for M299
