HDG M299, Operation Manual

Page: 52 / 176

4 Planning and installation – Installing the heating system
52
I
NSTALLING THE CLADDING
I
NSTALLING THE CLADDING
BRACKETS
1. Install the cladding brackets with the M10 screws (17 mm
spanner) according to the inscriptions “fr”, “br” and “rl” on the
corners of the boiler.
2. Screw in the M6 adjusting screw (1) on each of the upper three
cladding brackets (10 mm spanner).
When installing the cladding, there are differences depending on
whether the HDG M299/300/350/400 heating system is equipped
with TBZ 150 or TBZ 200.
The procedure described is for installation with equipment version
TBZ 200. Installation with equipment version TBZ 150 is specified
explicitly where necessary.
The substructure of the cladding is inscribed with letters which are
located on the upper end of the visible face for elements that are to
be installed vertically and on the left end of the visible face for
elements that are to be installed horizontally.
Figure 4/15 - Installing the cladding brackets
1
fr_t
fr_b br_t br_t
bl_t
rl_b
bl_t
back right