HDG M299, Operation Manual

Page: 55 / 176

4 Planning and installation – Installing the heating system
55
I
NSTALLING THE SUSPENSION
RAILS
7. Insert suspension rail (D) with the right end in the corner support
and fasten it with the M6 hexagon socket screws (5 mm spanner)
and intermediate washer.
8. Insert the three suspension rails (E) with the right ends in the
corner supports and fasten them with the M6 hexagon socket
screws (5 mm spanner) and intermediate washer.
9. Insert suspension rail (F) with the right end in the corner support
and fasten it with the M6 hexagon socket screws (5 mm spanner)
and intermediate washer.
10.Insert the two suspension rails (G) with the right ends in the corner
supports and fasten them with the M6 hexagon socket screws
(5 mm spanner) and intermediate washer.
11.Set the vertical rail (H) in the suspension rails.
12.Insert suspension rail (I) with the right end in the corner support
and fasten it with the M6 hexagon socket screws (5 mm spanner)
and intermediate washer on the corner support or the vertical
rail (H).
13.Set the vertical rail (J) in the suspension rails.
Figure 4/19 - Installing the suspension rails
I
D
L
E
G
F J H
K