72
Preventive Maintenance and Installation
P/N: SM-ACP215-01-EN(AB)
Haemonetics
®
ACP-215
®
Service Manual
Figure 16, Printer and shaker connectors
Note: Always use an SII specified adapter. The SII PW-4007-U1 AC adapter is
supplied with the printer.
To prevent electrical shock and possible damage to the AC adapt-
er, do NOT touch the pins of the DC plug.
To remove the AC adapter, turn off the power switch first, then un-
plug the AC adapter and the DC plug.
3. Plug the PW-4007-U1 AC adaptor into a grounded electrical outlet.
4. Connect the other end to the receptacle marked
DC 6.5V, 2A
, located at
the back of the printer.
Figure 17, AC adapter
5. Turn the printer on by moving the slider switch located on the left hand
side of the printer from the position marked 0 to the position marked l.
