118
Calibration and Configuration
P/N: SM-ACP215-01-EN(AB)
Haemonetics
®
ACP-215
®
Service Manual
Language
1. Access the Utilities mode of operation by pressing and holding
SHAKER
while switching the power on. Hold
SHAKER
until the UTLITIES menu
appears on the display.
2. Press
MODIFY PROGRAM
to move the arrow to CONFIGURATION and
then press
START
.
3. The message REMOVE MEMORY PROTECTION OR STRIKE STOP
appears.
4. Switch the memory protect switch located toward the bottom of the CPU
board (the left-most card cage board, looking from the rear of the unit) to
the Protect Off mode (down). The calibration screen appears with three
choices: PROTOCOLS CONFIGURATION, LANGUAGE, and
MACHINE.
5. Press
MODIFY PROGRAM
to move the arrow to LANGUAGE, then
press
START
.
6. Press
START
. The following screen is displayed:
7. Press
MODIFY PROGRAM
to move the arrow to ENGLISH, or desired
language, then press
START
. The following screen is displayed:
8. Press the STOP key two times to exit. The following message appears:
LANGUAGE SELECTION
—> ENGLISH ITALIAN
FRENCH DUTCH
GERMAN
Language = XXXXXXX
LANGUAGE SELECTION
—> ENGLISH ITALIAN
FRENCH DUTCH
GERMAN
Language = ENGLISH
CONFIGURATION
PROTOCOLS CONFIGURATION
—> LANGUAGE
******************************
**
REPLACE MEMORY
**
**
PROTECTION
**
******************************
