H3C XE 200 IP, Operation Manual

Page: 331 / 514

Operation Manual – System Management
H3C XE 200/2000 IP PBX
Chapter 7 SNMP Configuration
7-11
7.4 Configuration Example
I. Network requirements
Take the diagram below for example. A network management station (NMS) with the IP
address of 192.168.80.100/24 is connected to an XE IP PBX with the IP address of
192.168.80.50/24 via the Ethernet port.
II. Network diagram
NMS
192.168.80.100/24 192.168.80.50/24
XE
（
Agent
）
Figure 7-2 Network diagram for SNMP configuration
III. Configuration procedure
# Enter system view.
<XE> system-view
System View: return to User View with Ctrl+Z.
Press <Enter> to enter system view.
# Configure community name and access privilege level.
[XE] snmp-agent community read public
[XE] snmp-agent community write private
# Set the ID and contact of the administrator, and the physical location of XE IP PBX.
[XE] snmp-agent sys-info contact Mr.Wang-Tel:3306
[XE] snmp-agent sys-info location telephone-closet,3rd-floor
# Enable the trap packets destined for NMS 129.102.149.23, with the community name
public.
[XE] snmp-agent trap enable
[XE] snmp-agent target-host trap address udp-domain 192.168.80.100 udp-port
5000 params securityname public