H3C XE 200 IP, Operation Manual

Page: 452 / 514

Operation Manual – Call Services
H3C XE 200/2000 IP PBX
Chapter 19 Time Announcement Service
19-2
19.2 Time Announcement Service Configuration
19.2.1 Enabling/Disabling Time Announcement Service
Table 19-2 Enable/disable the time announcement service
Operation Command Description
Enter system view. system-view —
Enter LS view. location-server —
Enter LS-GW view. gateway device-id —
Enter subscriber number
view. subscriber short-number
long-number
—
Enable/disable the time
announcement service. srv-switch announce
{ on | off }
Required
Note:
This command can also be executed in LS-GW-PREFIX view.
19.3 Configuration Example
19.3.1 Configuration Requirements
Enable the time announcement service for subscriber 8801 under GW01.
19.3.2 Network Diagram
Note:
Refer to the network diagram in Network Diagram .
19.3.3 Configuration Procedure
1) Configure basic parameters on the XE IP PBX.
2) Configure basic parameters of gateways GW01, GW02, and GW03.