H3C XE 200 IP, Operation Manual

Page: 476 / 514

Operation Manual – Call Services
H3C XE 200/2000 IP PBX
Chapter 25
Number Query Service
25-2
25.2 Number Query Service Configuration
25.2.1 Configuration Procedure
I. Enable/Disable Number Query Service
Table 25-2 Enable/disable the number query service
Operation Command Description
Enter system view. system-view —
Enter LS view. location-server —
Enter LS-GW view. gateway device-id —
Enter subscriber number
view.
subscriber short-number
long-number
—
Enable/disable the number
query service. srv-switch query-self
{ on | off }
Required
Note:
This command can also be executed in LS-GW-PREFIX view.
25.3 Configuration Example
25.3.1 Configuration Requirements
Enable the number query service for subscribers 8801, 8802 and 8803.
25.3.2 Network Diagram
Note:
Refer to the network diagram in Network Diagram .
25.3.3 Configuration Procedure
1) Configure basic parameters on the XE IP PBX.
2) Configure basic parameters of gateways GW01, GW02, and GW03.