H3C XE 200 IP, Operation Manual

Page: 399 / 514

Operation Manual – Call Services
H3C XE 200/2000 IP PBX
Chapter 8 Calling Line Identification Services
8-5
8.2.4 Configuring CLIR Override Service
Table 8-8 Configure CLIR override service
Operation Command Description
Enter system view. system-view —
Enter LS view.
location-server
—
Enter LS-GW view. gateway device-id Required
Enter subscriber number
view. subscriber short-number
long-number
Required
Enable/disable the CLIR
override service.
srv-switch rio { on | off } Required
8.3 Configuration Example
8.3.1 Configuration Requirements
Enable the CLIR service for subscriber 8801 under GW01.
Enable the temporary reservation for CLIR service for subscriber 8802 under GW02.
Enable the CLIR override service for subscriber 8803 under GW03.
8.3.2 Network Diagram
Note:
Refer to the network diagram in Network Diagram .
8.3.3 Configuration Procedure
1) Configure basic parameters on the XE IP PBX.
2) Configure basic parameters of gateways GW01, GW02, and GW03.
Note:
Refer to Configuration Example for the basic parameter settings.
3) Configure service parameters on the XE IP PBX.
<XE>system-view