H3C XE 200 IP, Operation Manual

Page: 59 / 514

Operation Manual – Process Server Configuration
H3C XE 200/2000 IP PBX
Chapter 3 Gatekeeper Configuration
3-4
VII. Configuring timeout interval for call interruption function
This command is used to configure the timeout interval for the call interruption function.
If the timeout interval expires, the server will break the conversation.
Perform the following configuration in PS view.
Table 3-7 Configure the timeout interval for call interruption
Operation Command
Configure the timeout interval for the call
interruption policy call-interrupt-time
call-interrupt-time
Restore the default timeout interval undo policy call-interrupt-time
VIII. Entering PS-GK view
This command is used to enter PS-GK view.
Perform the following configuration in PS view.
Table 3-8 Enter PS-GK view
Operation Command
Enter PS-GK view gatekeeper
IX. Enabling/disabling the gatekeeper
The gatekeeper is disabled by default. When you use an XE IP PBX as a gatekeeper,
you must enable the gatekeeper function on it.
Perform the following configuration in PS-GK view.
Table 3-9 Enable/disable the gatekeeper
Operation Command
Enable the gatekeeper start
Disable the gatekeeper stop
Note:
When the PS is disabled, enabling the gatekeeper function will also enable the PS.