H3C XE 200 IP, Operation Manual

Page: 270 / 514

Operation Manual – System Management
H3C XE 200/2000 IP PBX Chapter 2 Terminal Service and User
Interface Configuration
2-6
III. Setting the terminal screen length
Table 2-9 Set the terminal screen length
Operation Command
Set the terminal screen length screen-length screen-length
Restore the default terminal screen
length
undo screen-length
By default, 24 lines are displayed on the terminal screen.
The command screen-length 0 disables multiple-screen output.
The undo screen-length command restores the default setting.
IV. Setting the size of the history command buffer
You may use the hot key <Ctrl+P> or <Ctrl+N> to execute the commands that you have
entered on the terminal. These commands are stored in the history command buffer
and you can set the number of stored commands using the history-command
max-size command.
Table 2-10 Set the size of the history command buffer
Operation Command
Set the size of the history command
buffer
history-command max-size size-value
Restore the default size of the history
command buffer
undo history-command max-size
The size-value argument specifies the size of the history command buffer. It defaults to
10, meaning up to 10 commands can be stored.
2.2.4 Configuring Modem Attributes
Note:
Modem attributes configuration is applicable to the AUX port only.
Besides logging onto the device directly, you can choose to dial into the device with a
modem from the AUX port. You may manage and configure the parameters related to
the modem in user interface view. The relevant commands are applicable to AUX port
only.