H3C XE 200 IP, Operation Manual

Page: 88 / 514

Operation Manual – Location Server Configuration
H3C XE 200/2000 IP PBX
Chapter 1 Location Server Configuration
1-4
You can specify the call mode ( redirect call mode or routed call mode) for SIP calling
or H.323 calling on the LS. In the redirect call mode, the PS registered with the LS
works in redirect mode; and in the routed call mode, the PS works in proxy mode.
Note:
When the SIP call mode is adopted, if CLIR (calling line identification restriction) is
enabled on the gateway, services that related with calling line may work improperly.
z
Querying statistics information about an LS
You can query the statistics information about an LS, including the statistics about the
messages received/transmitted by internal and external modules, and error count.
1.2.2 LS Features
The LS supports:
z
Networking with H3C’s SIP Server and H.323 gatekeeper
z
Networking with the H.323 gatekeeper from other vendors
z
Management on SIP Server or H.323 gatekeeper
z
Networking with H3C’s SIP devices and H.323 devices
z
Dynamic IP gateways
z
Management on gateways (including SIP user agent and H.323 gateway)
z
CAI proprietary protocol
z
When the XE 200 IP PBX functions as an LS, up to 1600 gateways, 3200
subscriber numbers and 3200 routes can be configured on the XE 200; at most
eight PSs can be cascaded.
z
When the XE 2000 IP PBX functions as an LS, up to 16000 gateways, 32,000
subscriber numbers and 32,000 routes can be configured on the XE 2000; at most
eight PSs can be cascaded.
1.3 Basic Configurations
The following sections describe the basic configuration tasks:
z
Entering LS View
z
Configuring Interface and Port Number
z
Configuring Call Mode
z
Enabling/Disabling an LS
z
Configuring Call-matching Criterion
z
Configuring Whether to Accept Requests from an Unknown Device
z
Configuring a PS Registered with an LS
z
Configuring a MS Registered with an LS