H3C XE 200 IP, Operation Manual

Page: 267 / 514

Operation Manual – System Management
H3C XE 200/2000 IP PBX Chapter 2 Terminal Service and User
Interface Configuration
2-3
In user interface view, you can configure and manage interface attributes, including:
z
Asynchronous attributes: speed, flow control, parity, stop bits and data bits.
z
Terminal attributes: enabling terminal service (shell), setting idle timer with the
command idle-timeout , setting the screen length with the command
screen-length for terminals, configuring authentication, and setting the size of the
history command buffer.
You can also set the authentication mode and user privilege level at login.
2.2.2 Configuring Interface Attributes
Note:
The default communication parameters for the console port are 9600 bps, 8 data bits, 1
stop bit, no parity and no flow control.
You are recommended not to change the defaults.
Perform the following configuration in user interface view.
I. Configuring transmission speed
Table 2-2 Configure transmission speed
Operation Command
Configure transmission speed speed speed-value
Restore the default speed undo speed
The following are the speeds available with the console and AUX ports:
z
300 bps
z
600 bps
z
1200 bps
z
2400 bps
z
4800 bps
z
9600 bps
z
19200 bps
z
38400 bps
z
57600 bps
z
115200 bps