Operation Manual – Call Services
H3C XE 200/2000 IP PBX
Chapter 15 Callback-On-Busy Service
15-4
Operation
Command
Description
Enter LS-SRV view.
service
—
Enter call back view.
cb
—
Set the call back interval
(in minutes).
interval
time-length
Optional, the default call back
interval is 1 minute.
Set the call back retry
times.
retry
times
Optional
The default retry times is 10.
15.2.2 Enabling/Disabling Callback-On-Busy Service
Table 15-4
Enable/disable the callback-on-busy service
Operation
Command
Description
Enter system view.
system-view
—
Enter LS view.
location-server
—
Enter LS-GW view.
gateway
device-id
—
Enter subscriber number view.
subscriber
short-number
long-number
—
Enable/disable the
callback-on-busy service.
srv-switch cb { on | off }
Required
15.3 Configuration Example
15.3.1 Configuration Requirements
Enable the callback-on-busy service for subscriber 8801 under GW01.
15.3.2 Network Diagram
Note:
Refer to the network diagram in
Network Diagram
.
Summary of Contents for XE 200 IP
