H3C XE 200 IP, Operation Manual

Page: 409 / 514

Operation Manual – Call Services
H3C XE 200/2000 IP PBX
Chapter 10 Call Forwarding Services
10-6
II. Verifying the CFC target number on the telephone set
The following table describes how to verify the CFC target number on the telephone
set.
Table 10-6 Verify the CFC target number on the telephone set
Step Expected result
Pick up the phone. The subscriber can hear the dial tone.
Dial #47#.
If there is a target number being set, the subscriber
can hear the ringback tone or the voice prompt “The
CFC target number you have set is xxxxx” (xxxx is
the target number being set).
If there is no target number being set, the subscriber
will hear the busy tone or the voice prompt “You
have not set any target number.”
Hang up the phone. —
III. Deleting CFC items on the telephone set
The following table describes how to delete the CFC item on the telephone set.
Table 10-7 Delete CFC items on the telephone set
Step Expected result
Pick up the phone. The subscriber can hear the dial tone.
Dial #47#, caller number and
# in sequence.
If the deletion succeeds, the subscriber can hear the
ringback tone or the voice prompt “You have
deactivated the service.”
If no target forwarding item is available for deleting,
the subscriber will hear the busy tone or the voice
prompt “Sorry, your attempt to deactivate the service
was unsuccessful.”
Hang up the phone. —
Caution:
Be cautious about the deletion, for all the CFC forwarding numbers will be deleted by
the operation.