Operation Manual – Process Server Configuration
H3C XE 200/2000 IP PBX
Chapter 5 SIP Server Configuration
5-1
Chapter 5 SIP Server Configuration
5.1 SIP Proxy Server Configuration
5.1.1 Introduction to SIP Proxy Server
A SIP proxy server can provides these functions:
1)
As the media between calling and called parties, forwarding messages to a remote
gateway or another SIP proxy server to complete and control calls
2)
Exchanging messages with the LS to manage users
5.1.2 Basic SIP Proxy Server Configuration
The basic SIP proxy server configuration tasks are described in the following sections:
z
Entering PS view
z
Assigning a LS to a proxy server
z
Configuring heartbeat password
z
Configuring the identifier and interface of a PS
z
Enabling/disabling a PS
z
Enabling/disabling long-time call interruption function
z
Configuring timeout interval for call interruption function
z
Entering PS-SIP view
z
Enabling/disabling the SIP Server
I. Entering PS view
Execute the following command in system view.
Table 5-1
Enter PS view
Operation
Command
Enter PS view
process-server
II. Assigning a LS to a proxy server
The LS assigned to a PS can be co-located with the PS or not. If they are not co-located,
you must configure the IP address, port number and priority of the device where the LS
is located.
Summary of Contents for XE 200 IP
