H3C XE 200 IP, Operation Manual

Page: 433 / 514

Operation Manual – Call Services
H3C XE 200/2000 IP PBX
Chapter 14 Third Party Call Control Service
14-2
Table 14-1 Configure the third party call control service
Operation Command Description
Enter system view. system-view —
Enter LS view. location-server —
Enter LS-SRV view. service —
Enter 3PCC view. 3pcc —
Configure the call participants
and call start time. participant identify num1 num2
start-time
Required
Display existing third party call
control tasks.
display location-server 3pcc
{ participant-number | active |
all }
Optional
Note:
The preset call start time must be later than the system time; otherwise the
configuration fails. If the call start time is not specified, it defaults to the current time.
14.3 Configuration Example
14.3.1 Configuration Requirements
On the XE IP PBX, configure the third party call control service for subscribers 8801
and 8802, with the call start time being 17:10:00.
14.3.2 Network Diagram
Note:
Refer to the network diagram in Network Diagram .
14.3.3 Configuration Procedure
1) Configure basic parameters on the XE IP PBX.
2) Configure basic parameters of gateways GW01, GW02, and GW03.