H3C XE 200 IP, Operation Manual

Page: 379 / 514

Operation Manual – Call Services
H3C XE 200/2000 IP PBX
Chapter 4 Inter-Group Call Restriction Service
4-2
4.2 Inter-Group Call Restriction Service Configuration
4.2.1 Configuration Procedure
Table 4-2 Configure the inter-group call restriction service
Operation Command Description
Enter system view. system-view —
Enter LS view. location-server —
Enter call limit group view. call-limit-group —
Create a call limit group.
limited-group
call-limit-group-name
Required
Change the name of a call
limit group. change old-group-name
new-group-name
Optional
Set call limit relationship
between groups. forbid src-call-limit-group
call dst-call-limit-group
Required
Exit call limit group view. quit —
Enter LS-GW view. gateway device-id Required
Enter subscriber number
view. subscriber short-number
long-number
Required
Enter call limit group
service view.
limited-call-group —
Add a subscriber to a call
limit group. limited-call-group
limited-call-group
Required
Exit call limit group view. quit —
Enable/disable the call
limit group service.
srv-switch
group-limited-call { on |
off
Required
4.3 Configuration Example
4.3.1 Configuration Requirements
z
Define two call limit groups named private-group and public-group respectively.
z
Set the call limit relationship to allow subscribers in private-group make calls to
subscribers in public-group and forbid subscribers in the latter make calls to
subscribers in the former.
z
Add subscriber 8801 under GW01 into private-group and subscriber 8802 under
GW01 into public-group.
z
Enable the call limit group service.