Operation Manual – Call Services
H3C XE 200/2000 IP PBX
Chapter 7 Do-Not-Disturb Service
7-2
Table 7-2
Deregister do-not-disturb service
Step
Expected result
Pick up the phone.
The subscriber can hear the dial tone.
Dial #56#.
If the do-not-disturb service is registered, the subscriber
can hear the ringback tone or the voice prompt “You have
deactivated the service”, which indicating the service
deregistration succeeded.
If the do-not-disturb service is not registered or is disabled,
the subscriber can hear busy tone or the voice prompt
“Sorry, you have not activated the service.”
Hang up the phone.
—
7.2 Do-Not-Disturb Service Configuration
7.2.1 Configuring Do-not-disturb Service
Table 7-3
Enable/disable do-not-disturb service
Operation
Command
Description
Enter system view.
system-view
—
Enter LS view.
location-server
—
Enter LS-GW view.
gateway device-id
Required
Enter subscriber number
view.
subscriber
short-number
long-number
Required
Enable/disable
do-not-disturb service.
srv-switch do-not-disturb
{
on
|
off
}
Required
Enter do-not-disturb view.
dnd
Required
Activate the do-not-disturb
service for a subscriber.
do-not-disturb open
Required
7.3 Configuration Example
7.3.1 Configuration Requirements
Enable the do-not-disturb service for subscriber 8801 under GW01.
Summary of Contents for XE 200 IP
