H3C XE 200 IP, Operation Manual

Page: 463 / 514

Operation Manual – Call Services
H3C XE 200/2000 IP PBX
Chapter 22 Automatic Operator Service
22-3
Note:
z
When configuring the automatic operator number, make sure that it does not conflict
with the subscriber line number, the static route number, the ONLY number and the
group notification number.
z
The automatic operator number must be a number already exists on the XE IP PBX.
22.3 Configuration Example
22.3.1 Configuration Requirements
Add the automatic operator number 8000 on the XE IP PBX. A subscriber that dials
8000 will hear the voice prompt (in media resource file 10010.wav) will be played. Then
the subscriber can dial 1 to call subscriber 8802, or dial 2 to call 8803.
22.3.2 Network Diagram
Note:
Refer to the network diagram in Network Diagram .
22.3.3 Configuration Procedure
1) Configure basic parameters on the XE IP PBX.
2) Configure basic parameters of gateways GW01, GW02, and GW03.
Note:
Refer to Configuration Example for the basic parameter settings.
3) Configure service parameters on the XE IP PBX.
# Add the automatic operator number 8000 on the XE IP PBX.
<XE>system-view
[XE]location-server
[XE-ls]service
[XE-ls-srv]auto-operator 8000
[XE-ls-srv-ao-8000]prompt 10010
[XE-ls-srv-ao-8000]extension 1 8802