H3C XE 200/2000 IP, Operation Manual

Page: 335 / 514

Operation Manual – System Management
H3C XE 200/2000 IP PBX
Chapter 8 Modem Management Configuration
8-3
of them, the script execution is terminated. Wherever an ABORT receive-string is
placed, it takes effect in the whole script execution flow.
z
You can insert escape characters in a script to further control the script and
increase its flexibility. In addition, all the escape characters play the role of
delimiters in string as well.
Table 8-1 Script keywords
Keyword Description
ABORT receive-string
The string following ABORT will be compared with the
strings sent from the Modem or remote DTE device in
exact matching mode. One script can includes multiple
ABORT settings, and all of them take effect in the whole
script execution process.
TIMEOUT seconds
The digit following TIMEOUT is used to set the timeout
time that allows the system to wait for a receive-string. If
no expected string is received within this time, the
execution of the script fails. Once set, the settings will be
valid till a new
TIMEOUT is configured.
Here seconds is in the range of 0 second to 180 seconds and defaults to 180.
Table 8-2 Escape characters used in script
Escape character Description
\c
Represents that the system does not automatically
append a carriage return to the string; it sends only the
specified characters in the string. The "\c" character is
valid only when it is located at the end of the send-string.
\d Represents a two-second pause.
\n Represents the new line character.
\r Represents the carriage return character.
\s Represents the space character.
\t Represents the Tab character.
\\ Represents the backslash ("\") character.
\T Represents telephone number.
8.2 Modem Management Configuration
The following sections describe the Modem management configuration tasks:
z
Configuring the Incoming and Outgoing Calls of the Modem
z
Configuring a Modem Script
z
Executing a Modem Script Manually