H3C XE 200/2000 IP, Operation Manual

Page: 328 / 514

Operation Manual – System Management
H3C XE 200/2000 IP PBX
Chapter 7 SNMP Configuration
7-8
# Set the location of the XE IP PBX to h3c.
[XE] snmp-agent sys-info location h3c
7.2.11 Specifying the Source Address of Trap Packets
Use the configuration to set or delete the source address of the trap packets.
Perform the following configuration in system view.
Table 7-12 Specify/delete the source address of the trap packets
Operation Command
Specify the source address of
trap packets
snmp-agent trap source { interface-type
interface-number | interface-name }
[ subinterface-type ]
Delete the source address of
trap packets
undo snmp-agent trap source
# Take the IP address of the Ethernet interface 1/0 as the source address of the trap
packets.
[XE] snmp-agent trap source ethernet 1/0
7.2.12 Setting the MIB View
Use the configuration to establish, update or delete the view.
Perform the following configuration in system view.
Table 7-13 Establish/update/delete a view
Operation Command
Establish or update a view
snmp-agent mib-view { included | excluded }
view-name oid-tree
Delete a view undo snmp-agent mib-view view-name
# Create a view including all the objects of internet (1.3.6.1).
[XE] snmp-agent mib-view included myview 1.3.6.1
7.2.13 Setting the Maximum Size of SNMP Packets
Use the configuration to set the maximum size of SNMP packets to and from Agent.
Perform the following configuration in system view.