H3C XE 200/2000 IP, Operation Manual

Page: 194 / 514

Operation Manual – Feature
H3C XE 200/2000 IP PBX
Chapter 1 Number Substitution
1-10
Table 1-10 Configure/delete a substitute rule for the device
Operation Command
Configure a substitute rule for the device
rule rule-tag { caller input-format
output-format [ callee input-format
output-format ] | callee input-format
output-format } { before | after }
Delete the specified or all substitute
rules for the device
undo rule { rule-tag | all }
By default, no substitute rule is configured.
IV. Configuring/deleting substitute rules for subscriber lines
You can also configure number substitute rules for a subscriber line as the number
substitution policy for all calls related to the subscriber line.
Note:
You can create up to two number substitution rules for each subscriber line.
Perform the following configuration in subscriber view
Table 1-11 Configure/delete a substitute rule for the subscriber line
Operation Command
Configure a substitute rule for the
subscriber line
sscb-rule rule-tag { caller input-format
output-format [ callee input-format
output-format ] | callee input-format
output-format } { before | after }
Delete the specified or all substitute
rules for the subscriber line
undo sscb-rule { rule-tag | all }
By default, no substitute rule is configured for subscriber lines.
V. Creating/deleting a substitute table
When required to use many substitute rules, you can configure them in a substitute
table and then bind the table to the LS globally, to a device, to a subscriber line number,
or to a static route number for management convenience.
In addition, using substitute tables allows you to create multiple sets of substitution
policies, between which you can toggle quickly to accommodate to network changes.
Perform the following configuration in LS view.