H3C XE 200/2000 IP, Operation Manual

Page: 56 / 514

Operation Manual – Process Server Configuration
H3C XE 200/2000 IP PBX
Chapter 3 Gatekeeper Configuration
3-1
Chapter 3 Gatekeeper Configuration
3.1 Introduction to Gatekeeper Configuration
Given the XE 200 or the XE 2000, the H.323 gatekeeper must cooperate with the LS.
The gatekeeper provides call control and registration service, and retrieve/report user
information from/to the LS. This chapter describes how to configure the H.323
gatekeeper.
To know how to configure the LS, refer to the chapter discussing configuration
examples in the “LS Configuration” part of this manual.
3.2 Basic Gatekeeper Configuration
I. Entering PS view
Execute the following command in system view.
Table 3-1 Enter PS view
Operation Command
Enter PS view process-server
II. Assigning an LS to a PS
The LS assigned to a PS can be co-located with the PS or not. If they are not co-located,
you must configure the IP address, port number and priority of the device where the LS
is located.
Caution:
When configuring a remote LS, make sure that its IP address and port number are the
same as the ones configured on the LS.
Perform the following configuration in PS view.