Operation Manual – Basic Configuration
H3C XE 200/2000 IP PBX
Chapter 3 Basic Configuration
3-4
Table 3-8
Set command privilege
Operation
Command
Set command privilege in a view
command
-
privilege
level
level view
view
command-key
Reset the default command privilege
undo
command
-
privilege
view
view
command-key
Table 3-9
Default command privilege
Code
Level
Command
0 Visit
ping
,
tracert
,
telnet
1 Monitor
display
,
debugging
2 System
All configuration commands except for those of
manage level
3 Manage
File System commands, FTP commands, and TFTP
commands
Note:
Each command belongs to its default view and has corresponding privilege; therefore it
is not necessary to reset them.
IX. Displaying system status information
Use the
display
command to collect system status information, which can be classified
as follows:
z
Commands that display system configuration information
z
Commands that display the status of system operation
z
Commands that display system statistics
For the details of the
display
command of various protocols and interfaces, refer to
corresponding chapters. The table below lists some system-related
display
commands.
Perform the following configuration in any view.
Summary of Contents for XE 200/2000 IP
