H3C XE 200/2000 IP, Operation Manual

Page: 481 / 514

Operation Manual – Call Services
H3C XE 200/2000 IP PBX
Chapter 26 Alarm Clock Service
26-4
26.2 Alarm Clock Service Configuration
26.2.1 Enabling/Disabling Alarm Clock Service for a Subscriber
Table 26-4 Enable/disable the alarm clock service
Operation Command Description
Enter system view.
system-view
—
Enter LS view. location-server —
Enter LS-GW view. gateway device-id —
Enter subscriber number
view. subscriber short-number
long-number
—
Enable/disable the alarm
clock service.
srv-switch alarm { on | off } Required
26.2.2 Setting Alarm Clock Task through Command Lines on XE IP PBX
Table 26-5 Set an alarm clock task through command lines on the XE IP PBX
Operation Command Description
Enter system view. system-view —
Enter LS view. location-server —
Enter LS-GW view. gateway device-id —
Enter subscriber number
view. subscriber short-number
long-number
—
Enter alarm clock view. alarm —
Set an alarm clock task.
alarm { { date time } | { time
{ once | cycle } } }
Required
Note:
The alarm clock setting can not be modified once it is set. To modify an alarm clock, you
need to delete it first and re-configure an alarm clock through the command line or on a
phone.