manualshive.com logo in svg

H3C XE 200/2000 IP, Operation Manual

The H3C XE 200/2000 IP is a cutting-edge networking device that offers superior performance and reliability. Its operation manual is available for free download from manualshive.com, providing users with comprehensive instructions and guidance to optimize their experience with this exceptional product.

Share
Download
background image

Operation Manual – Call Services 
H3C XE 200/2000 IP PBX

 

Chapter 27  Appendix

 

27-15 

Service 1

 

Service 2

 

Nested relationship

 

Password call

 

The password call service is 
supported.

 

Call forwarding

 

Only the CFO service is 
supported.

 

Third party call control

 

The call intervention service is 
not supported when the called 
party is being alerted or when 
the called party has picked up 
the phone but is not in a 
conversation.

 

Callback-on-busy

 

The call intervention service 
takes precedence over the 
callback-on-busy service. 
However, the call intervention 
service is not supported when 
the called party is being alerted 
or when the called party has 
picked up the phone but is not 
in a conversation.

 

Call pickup

 

The call intervention service 
takes precedence over the call 
pickup service. That is, the 
alerted party involved in the call 
intervention service does not 
support the call pickup service.

Dialing test

 

The dialing test service is not 
supported.

 

CPCP

 

The CPCP service is not 
supported.

 

Call intervention

 

The call intervention service 
does not support nesting. That 
is, the call intervention service 
is no longer applicable to a call 
which itself is established by 
using the call intervention 
service.

 

Call transfer

 

The call transfer service is not 
supported.

 

Time announcement

 

The time announcement 
service is not supported.

 

MyRing

 

The MyRing service is not 
supported.

 

 

Automatic operator

 

The call intervention service is 
not supported when a 
subscriber dials an automatic 
operator number to hear the 
system play announcements.

 

Summary of Contents for XE 200/2000 IP



































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for XE 200/2000 IP

ATCOM IPPBX IP04 User Manual preview
IPPBX IP04
Brand: ATCOM Pages: 35
Quadro Quadro2x Installation Manual preview
Quadro2x
Brand: Quadro Pages: 57
Panasonic KX-NCP500GR Service Manual preview
KX-NCP500GR
Brand: Panasonic Pages: 159

Brands by name

Popular brands

Load more brands