manualshive.com logo in svg

H3C XE 200/2000 IP, Operation Manual

The H3C XE 200/2000 IP is a cutting-edge networking device that offers superior performance and reliability. Its operation manual is available for free download from manualshive.com, providing users with comprehensive instructions and guidance to optimize their experience with this exceptional product.

Share
Download
background image

Operation Manual – Call Services 
H3C XE 200/2000 IP PBX

 

Chapter 27  Appendix

 

27-22 

Service 1

 

Service 2

 

Nested relationship

 

Subscriber management

 

The subscriber management 
service is supported.

 

Abbreviated dialing

 

The abbreviated dialing service 
is not supported.

 

Password call

 

No password is required for the 
local number query service.

 

CPCP

 

The CPCP service is not 
supported.

 

Call intervention

 

The call intervention service is 
not supported when the calling 
subscriber hears the XE IP PBX 
play announcements.

 

Call transfer

 

The call transfer service is not 
supported when the calling 
subscriber hears the XE IP PBX 
play announcements.

 

Number query

 

Automatic operator

 

The automatic operator service 
does not support the local 
number query service.

 

Multiple called parties

 

The multiple called parties 
service is supported. That is, if 
the alarm clock service is set for 
one called subscriber, all the 
other subscribers with the same 
number on the local XE IP PBX 
will be alerted.

 

Subscriber management

 

The subscriber management 
service is supported.

 

Do-not-disturb

 

The alarm clock service takes 
precedence over the 
do-not-disturb service and the 
do-not-disturb service fails.

 

CLIP

 

“00000000” will be displayed if 
the CLIP service is enabled for 
the called subscriber.

 

Password call

 

No password is required for the 
alarm clock service.

 

Call forwarding

 

None of call forwarding 
services are supported.

 

Callback-on-busy

 

The callback-on-busy service is 
not supported. The 
callback-on-busy service fails.

 

Alarm clock

 

Call pickup

 

The call pickup service is 
supported.

 

Summary of Contents for XE 200/2000 IP



































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for XE 200/2000 IP

Aastra OpenCom 100 series Mounting And Commissioning User Manual preview
OpenCom 100 series
Brand: Aastra Pages: 256

Brands by name

Popular brands

Load more brands