H3C XE 200/2000 IP, Operation Manual

Page: 315 / 514

Operation Manual – System Management
H3C XE 200/2000 IP PBX
Chapter 6 User Management
6-3
Table 6-2 Configure the method of user authentication
Operation Command
Set to perform user authentication
authentication-mode { password |
local | scheme }
Set not to perform user authentication authentication-mode none
The keyword none specifies no authentication. The keyword password specifies to
perform the password authentication without the user name. You can set the password
by the set authentication password command. The keyword local specifies to
perform local authentication, requiring both the user name and the password.
User interface of VTY type (Telnet) defaults to adopt password authentication. User
interface of Console and AUX do not perform terminal authentication by default.
The keyword local is commonly used to perform local authentication when configuring
the authentication method for Telnet and terminal users.
6.2.2 Configuring Password Authentication
I. Configuring the password for password authentication
If you choose to perform the password authentication, you must set the password.
Perform the following configuration in user interface view.
Table 6-3 Set the password for password authentication
Operation Command
Set the password for password
authentication set authentication password { cipher |
simple } password
Delete the password for password
authentication
undo set authentication password
Cipher : Means to configure an encrypted text password.
Simple : Means to configure a plain text password.
II. Configuring Privilege level of user interface
In case of password authentication, the user level is determined by the privilege level of
the user interface.
Perform the following configuration in user interface view.