Operation Manual – Location Server Configuration
H3C XE 200/2000 IP PBX
Chapter 3 Configuration Examples
3-9
[XE] process-server
[XE-ps] ps-config xeippbx interface Ethernet 0/0
[XE-ps] heartbeat password xe200
[XE-ps] ls-mode 0 local
[XE-ps] start
[XE-ps] gatekeeper
[XE-ps-gk] start
4)
Configure the LS
# Configure the LS.
[XE]location-server
[XE-ls] ls-config interface Ethernet 0/0
[XE-ls] call-mode h323 routed
[XE-ls] start
[XE-ls] process-server xeippbx
[XE-ls-ps-xeippbx] heartbeat password xe200
[XE-ls] gateway h323gateway1
[XE-ls-gw-h323gateway1] device-type h323
[XE-ls-gw-h323gateway1] dynamic-ip enable
[XE-ls-gw-h323gateway1] quit
[XE-ls] gateway h323gateway2
[XE-ls-gw-h323gateway2] device-type h323
[XE-ls-gw-h323gateway2] dynamic-ip enable
3.4 Office Device Configuration
I. Network requirements
Both XE 200 IP PBXs in LS areas 1 and 2 are in integrated networking mode. The XE
IP PBX XE 1 in LS domain 1 is configured with two office devices each corresponding
to one VG in LS domain 2 for H.323 calls.
Summary of Contents for XE 200/2000 IP
